Tower Marine Boat Sales
868 Holland Street P.O. Box 1076
Saugatuck, Michigan, US, 49453
Tel:616.836.0889
Chris-Craft Launch 28 GT - main image

2020 Chris-Craft Launch 28 GT

location icon Saugatuck, Michigan
Year 2020
Length 28 ft

This is a New 2020 Chris-Craft Launch 28 GT with the Heritage Trim Edition and Powered by a Volvo-Penta 5.3 Liter 350hp Dup Prop with EVC and Freshwater Cooling.  She Just Arrived in our Showroom and She is Loaded with All the Right Options.  Start Turning Heads Today and Don't Miss Out on This Beautiful Chris-Craft.  

Colors & Top Selections:

 

Options & Features Include:

Engine Description

CONTACT US TODAY.  WE LOOK FORWARD TO ASSISTING YOU.  

Specifications

Year Built 2020
Category Power
Length Overall 28'9 ft
Length Of Deck 28'9 ft
Beam 8'6 ft
Max Draft 3'1 ft
Construction Fiberglass
Hull ID CCBMC194L920
Deadrise Angle 22 °
Min Draft 1'5 ft
Drive Type Stern
Engines 1
Total Engine Power 350 hp
Fuel Tanks 1
Fuel Tank Cap. 85 gal
Water Tanks 1
Water Tank Cap. 20 gal
Dry Weight 7,800 lb
Freeboard Measure 2'1 ft
Windlass Electric

Engine 1 Specifications

Make: Volvo-Penta
Model: 5.3 Liter DP FWC DP
Drive Type: Stern
Fuel: Unleaded
Engine Power: 350hp
Type: Inboard/Outboard
Propeller Type: Stainless Steel, Duoprop
Year: 2020
Engine Location: Center
Standard Features
  • Teak Maintenance Kit
  • Teak Caulk Color Choice – black or blonde
  • 3 Yr - Chris Craft protection plan
  • 5 Yr - transferable hull/structural warranty
  • Bow Scuff Plate - SS
  • Certifications and Standards - NMMA, ABYC, USCG
  • Deck Fill Plates - SS
  • Deck - diamond pattern non-skid, fiberglass
  • Flag/Pennant - embroidered Chris Craft and US Flag kit w/SS magnetic pole and base
  • Color Selections - base gel, Ivory Cream
  • Color Selections - boot stripe - multiple color selections
  • Gunnel Trim Rubrail - molded PVC w/SS insert
  • Hardware - bow and stern eyes, SS
  • Hardware - bow light cover, SS
  • Hardware - chrome plated SS fasteners
  • Hardware - cleats, SS mooring
  • Hardware - high end fit n finish w/316L SS and Chris Craft logo
  • Hardware - thru-hull fittings, SS
  • Hatches - vacuum infused w/ SS shocks
  • Hull - Chris Craft trademark Tumblehome design
  • Hull - deep V bottom w/flared bow
  • Hull - deck joint - mechanically, chemically bonded
  • Lighting - navigation lights, SS and international compliance
  • Logo - SS, Chris Craft branded
  • Swim Ladder - 3 step, SS hidden
  • Swim Platform – integral
  • Swim Platform Grabhandle - SS
  • Beverage Holders - Stainless Steel
  • Bolsters - padded gunwhale mounted
  • Drains – SS
  • Fuel System - EPA compliant
  • Grabrails - SS
  • Helm - compass, dash mounted
  • Helm - dash, gauge and switch panels w/silver perforated panels
  • Helm - dash light dimmer
  • Helm - ignition safety switch(es)
  • Helm - model designator, SS
  • Helm - steering wheel, mahogany
  • Helm - steering, tilt w/power assist
  • Helm - stereo remote, MP3/USB inputs w/Fusion Bluetooth enabled
  • Ladder - Stainless Steel boarding
  • Lighting - LED courtesy
  • Outlets/Input - 12v accessory outlet(s)
  • Outlets/Input - USB auxiliary input
  • Speakers - JL Audio Sound System
  • Stereo System - Premium upgrade with amp and subwoofer
  • Stowage - aft deck compartments
  • Upholstery Construction - high density foam with antimicrobials and open cell mesh for drying
  • Vinyl - heavy duty, stain/UV resistant
  • Vinyl - multiple design/color selections
  • Windscreen - curved tempered glass
  • Windscreen - Stainless Steel Frame
  • Battery Charger
  • Battery Switch w/breakers
  • Battery Tray(s)
  • Bilge Pump - w/autofloat System
  • Electric Wiring - color coded and numbered w/Duetch connectors
  • Electrical Bonding System
Standard Equipment
  • Teak - bow accents w/SS inserts and Chris Craft SS Logo inlay
  • Teak - cockpit steps
  • Teak - beverage holder accents
  • Teak - engine walk-over
  • Teak - grab rails (Aft)
  • Teak - helm footpad / footrests
  • Air Intakes - SS
  • Anchor - bow locker - w/teak and Chris Craft logo inlay
  • Hull - stringer system and liner, 1 piece fiberglass foam filled for floatation and noise reduction
  • Ski Pylon - removable (*pop-up)
  • Swim Platform - integral w/ 3-step ladder
  • Trim Tabs - Lenco
  • Ventilation Grates/Stainless Steel
  • Canvas - bimini top w/SS bows and color fast acrylic
  • Door - wind, hinged, folds to deck in bow area
  • Galley - refrigerator
  • Helm - depth finder - LCD
  • Helm - digital gauge package, Chris Craft branded
  • Helm - engine controls, Electronic Control - EVC/DTS/DEC
  • Helm - Engine control, chrome, side mounted
  • Helm - horn, electric trumpet(s)
  • Helm - trim tab controls
  • Seating - aft cockpit, port and starboard rear facing sun loungers
  • Seating - aft U-shaped Seating - bucket seats w/integrated SS handrails and flip-up bolsters
  • Seating - forward, circular w/forward facing port and starboard lounges
  • Seating - portside passenger, chair w/flip-up bolster, swivel and SS integrated grab handles
  • Seating - sunpad, large aft w/ transom walk-over (*includes filler pad)
  • Shower - transom
  • Stowage - aft cockpit, underseat
  • Stowage - bimini, dedicated under engine hatch
  • Stowage - bow, port and starboard recessed
  • Stowage - coaming w/beverage holders
  • Stowage - fender, hidden
  • Stowage - infloor ski/rod
  • Stowage - infloor w/built-in cooler
  • Stowage - port and starboard underseat
  • Windscreen - tempered glass, center walk-thru
  • Toilet - porti-potti
  • Bilge System - electric w/blowers
  • Electric Wiring - tinned copper
  • Engine Compartment Stowage
  • Engine Hatch - emergency lift w/jumper posts
  • Engine Hatch - w/SS hinges, electric rams
  • Engine Hatch Insulation - acoustical barrier, Silver Mylar
  • Fire Extinguish System - automatic w/manual override
  • Fuel System - aluminum tanks w/anti-siphon valves and electric sending units
Default Disclaimer

Tower Marine Boat Sales, Inc. offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Additional Contact Information

Contact Information: 

Matt Peterson

  • cell: 616-836-0889  
  • e-mail: mpeterson@towermarine.com

Brian Bussema

  • cell: 616-886-1014
  • e-mail: brian@towermarine.com

See All Our Chris-Craft Inventory: www.towermarineboatsales.com